Sprecher + Schuh offers a broad selection of pre-assembled or
"build-from-stock" starters housed in either a CUL-approved
Type 1, 12K enclosure or a UL-Approved Type 4, 4X, 12 enclosure.
for convenience, space savings and economy, KWIK starters are
efficiently designed to use stock CA7 contactors and CT7K thermal
overload relays or the advanced CEP7 solid state overload.
and overload are either prewired and pre-mounted onto the enclosure's
built-in DIN-rail or may be ordered as separate components. Ample
knockouts and open terminals guarantee quick, no fuss wiring.
Often referred to as "manual type" starters, the KWIK starters are full-voltage magnetic motor starters complete with electrically-connected pushbuttons or selector switches.
KWIK starters are sized for most industrial applications
These starters control motors up to 25HP @ 460V (30HP @ 575V) in an
enclosure measuring only 187 x 90mm (7-3/8" x 3-1/2"). This
covers over 85% of industrial motor control applications in a very
compact package that can be mounted adjacent to or directly on
Designed for simplicity
The enclosure for the KWIK starter is designed for simplicity. The
START button mechanically interfaces with a special side mounted N.O.
auxiliary (Cat.# CA7-PA-H10) with minimal wiring. The STOP button also
mechanically interfaces with the N.C. contact on the overload relay,
providing STOP and RESET functions with no additional wirig.
On/Off or Hand/Off/Auto selectors are also available options in the (30 - 43A) contactor series with (9 - 45A) overload relay.
Stock items - All attractively priced!
For more infomation call your Western Canada (Edmonton, Alberta) distributor at (780) 451-0418.
CAK7-12-220W-EDB-P2 (Rated NEMA 4, 3 HP at 230v, 3-phase), complete with Stop/Start/Reset ........ $141.43 + Tax
Prices are subject to change without notice.