|
|
|
 |
Foot swtiches: The rugged, long life Clipper foot switch
models have proved themselves in the field over many years of usage. All maintained models
offer "Push On-Push Off" action through a molded nylon actuating cam mechanism
that insures long trouble-free performance. The wide treadle models offer a large seven
inch target for the operator's foot. Cast iron housing. Nonskid base pad. Complete with
adjustable strain relief connector. Black finish switch complete with bright orange foot
guard. One of the few switches available rated for direct control of 1 HP, at either 120v
or 240v, (or AC1 - 20A, 250v).
|
Limit switches:
Lovato / Ersce limit switches feature a comprehensive line of high quality switches
perfectly suited for a wide variety of sensing applications. These switches are available
in a variety of sizes and with a wide selection of actuators. Ersce safety switches
include key types, pull rope types and hinge types.
- Various housing and actuator styles.
- Thermoplastic or painted diecast metal housing.
- 1/2 in or PG13.5 conduit entry.
- CSA / UL / CE approvals
- Choice of slow or fast action contacts.
- Various contact arrangements.
|
|
|
Overhead crane pendant stations:
Series 74 and 75 pendant pushbutton stations are designed for heavy-duty hoist and crane
applications. They are available in 2 through 12 buttons with single-speed, two-speed, and
three-speed contact blocks. Fabricated of rugged high impact corrosion and chemical
resistant thermoplastic, and furnished complete with standard nameplates, and booted
pushbuttons with directional arrows.
|
| Surge arrestors: Lightning
or an interruption in the power line can generate a power surge. These high energy surges
can enter a home or building through the electric service entrance. Once the surge enters
the building, there is a possibility that high voltages resulting from the surge current
will damage electrical wiring or equipment. Surge Tec®
arresters are designed to limit surge voltages by discharging (bypassing) surge currents
to ground. Individuals should assess their risk by evaluating the potential impact that
a power surge may have on their property. In many cases, the cost of protection is
relatively inexpensive compared to the possible loss. The Surge Tec®
arrester is designed to provide brute force protection against surges at the service
entrance, where protection is needed the most. The family of Surge Tec®
arresters provides an excellent first line of defense for any critical electrical service,
whether it is in a home, business or industrial application.
FEATURES
Surge Tec® arresters incorporate special features that
make them stand above other Secondary Arresters and Transient Voltage Surge Suppressors
(TVSS). These arresters use a patented (#5,502,612) fault withstand design along with
replacement indication. The arresters are available in 175 volt, 480 volt and 650 volt AC
ratings for application on system voltages below 650 volts phase to ground and operate at
frequencies between 48 and 62 Hz. The units come with 18 inch, #14 AWG solid copper wire
leads and are designed to be mounted outdoors or indoors.
|
Limits switches
Dust caps (weatherproof boots) for 30mm buttons
|
|
 |
Push buttons & selector switches: Push Buttons and Selector Switches -
a comprehensive line of high quality modular switches perfectly suited for a wide variety
of applications. All switches, whether they are 22mm or 30mm types, share the same output
modules and lamp holders.Ersce Range Comprises
- Push button, selector, or joystick switches.
- Standard and illuminated types available.
- For mounting in 22mm or 30mm panel cutouts.
- Various housing and actuator styles.
- Plastic or metal ring.
- CSA / UL / CE approvals
- Various contact arrangements.
|
|
|
| Two or three-hole remote pushbutton stations (NEMA 12).
Idealy, a three-hole device will include Stop, Start, and Pilot light. |
| Lovato Timers:
A comprehensive range of timers for mounting in the back of or for mounting on the front
of panels. Cover most timing functions (On Delay, Interval, Off Delay, One Shot, Zero
Speed, Star-Delta, and Recycler). These timers are suited for practically every
application. Timers are frequently used in motor control centres, packaging machinery,
control panels, and process control. Lovato Range Comprises
- 8 or 11 pin plugin types.
- DIN rail mounting types which don't require a socket or base.
- Single and multi-function types.
- Single and multi-time range types.
- Single and multi-voltage types.
- Automatic and manual timing start.
- Some models feature remote time setting via a potentiometer.
|
|
Indicator lights:
(Pilot lights) - available both as Monoblock (complete pilot light assembly), or as
separate items consisting of head, mounting adapter, and lamp. Colors: Green, Red, Blue,
Amber, White.
|
Resets: 22mm
non-metallic, and 30 mm metalic reset operators. Building control panels? The 22mm reset
has a metal threaded rod adjustable up to 4.90".
|
Emergency stop buttons:
Maintained, turn to release, mushroom head (40mm, 60mm) emergency stop, with highly
visible turn arrow indicator.
|
| Dust caps:
Weatherproof boots (with internal thread ring) for 30mm flush pushbuttons. Availalbe
in Red or Black. |
|
|