Linemaster foot switches



Linemaster foot switches are stocked in our Edmonton, Alberta, Canada, facility.

 

EN 60529 Degree of Protection IP20 (IP68 Upon Request)

Splash Resistant ∑ Corrosion Resistant (Available) foot switches


Medium Duty, General Purpose Design >>>


Materials of Construction:
  • Constructed of Cast Iron for long life
  • Non-skid base pad
  • Adjustable Strain relief connector
  • Durable black finish
  • Model 632-DA can be used to control lighting
  • Model 638-S features a cast aluminum housing painted Alert Orange with a splash resistant interior switch
  • Features & Benefits:
  • Proven Reliability
  • All maintained models offer "Push On-Push Off" action that insures long trouble-free performance
  • 2 holes provided for rigid mounting to floor or equipment
  • Stocked in Edmonton, Alberta, Canada
  •  

                             Metal guard


      Clipper
      foot switch
     

    Options:

  • The wide treadle models offer a large seven inch target for the operatorís foot
  • Available protective vinyl cover that can be applied over our Clipper. This boot is available only in bright orange, and provides additional protection to the foot switch from limited amounts of liquid, dust, dirt, mud and snow
  • Air Valve models available
  • Heavy gauge steel guard available
  •  

    _____________________________________ ____________________________________
    Key Benefits:
    • Foot switch developed for worldwide application
    • Snap action - SPDT and DPDT with forced disconnect (positive break) on NC contacts
    • Slow action mechanism with forced disconnect on the NC contacts - available as SPDT make before break or break before make
    • Direct PLC interface compatible (two-circuit bifurcated contact single-pole versions)
    • Galvanically isolated bifurcated contacts - NO and NC circuits can be wired to different loads and polarities
    • Foot switch has a rugged cast aluminum housing painted Alert Orange
    • Oversized "O" & "OX" shield models accept oversized safety shoes and metatarsal foot guards. The "OX" shield has an additional 3/4" (19.1mm) opening height as compared to the "O" shield
    • Single PG 16 threaded conduit entry is standard
    • U.S. and other international conduit sizes and side entry for twin or triple interconnect, available to the O.E.M. on special order
    • 3 holes provided for rigid mounting to the floor or equipment

     

     Atlas Heavy Duty Switch

     

     

     

    Environmental Ratings:

    NEMA Type 1, 2, 4, 6, 6P & 13
    UL ENCLOSURE 1, 2, 4, 6, 6P & 13
    IP68
    IEC 60601-2-2
    Drip tight - Dust tight - Water tight - Oil tight

    Size: 9" x 6" x 5-1/2"
    Weight: Approx. 4-1/2 lbs. (2.1 kgs.)

     

     

    Electram Rotary Equipment Ltd, 18112 - 107th Avenue,
    Edmonton, Alberta, Canada, T5S 1K5

    Part of the PhaseMAXX Power Products Group