| AC Tech AC Inverter Drives
Stocked in Canadian and USA warehouses.
Produced in North America, AC Tech is
stocked in Western Canada, Eastern Canada, and most of the continental
USA.
MC Series -
Three
Phase input or (Single Phase Input with de-rate) / Three Phase Output
Constant torque /
Constant HP drive
|
|
|
|
The MC Series drives are built in rugged
steel enclosures that hold up to daily life on the factory floor. The
easy to read 16 character LCD display above the drive keypad allows
for easy and intuitive set up as well as daily operation.
- 1/4 through 150HP (0.18 - 110kW)
- Input voltages from 120V single phase (with voltage
doubler) to
590VAC
- NEMA Type 1, 12, 4 and 4X Enclosures
|
|
|
|
|
|
|
| Variable frequency drives |
| AC inverter drives |
|
| (Single
or Three phase input) |
|
| |
|
This constant horsepower drive can be set up for simple
applications requiring ramped start, ramped stop and speed control to
demanding applications that require PID set-point control and many
other functions. The MC Series consists of the MC1000 and MC3000
models; most applications will use the MC1000 with a keypad that
includes Start, Stop, up, down, forward/reverse, Program/Run,
Auto/Manual and Enter buttons.
For non-reversing applications that
require independent switching of start and stop from local to remote
and speed control from auto to manual, the MC3000 series keypad
replaces the forward/reverse button with Local/Remote.
Technical documentation for the MC Series Drives, and all AC Tech
brand drives, is available in the AC Tech Technical
Library.
Programmable
Features:
Carrier Freq. 2.5 - 14 kHz
Independent Accel and Decel Ramps
120 Hz Maximum Output Freq.
(650 Hz available)
DC Injection Braking
PID Setpoint Control
Critical frequency avoidance bands
Speed References:
Keypad
JOG (Fwd or Rev)
Floating Point Control (MOP)
0-10 VDC Analog Reference (scalable)
4-20 mA Analog Reference (scalable)
Potentiometer
4 Programmable Preset Speeds
Modbus RTU Serial Sped Reference |
|
